
Accessories
Safe reprocessing with a focus on value retention: Versatile accessories ideally complement glasswashers in a wide range of applications.
300 Products

Injector nozzle
for butyrometers.

Upper basket
for optimum loading of centrifuge tubes, phials or test tubes, for example.

Insert
For the optimum loading of wide neck flasks, measuring cylinders, etc.

Insert
For the optimum loading of wide neck flasks, measuring cylinders, etc.

Insert
For the optimum loading of wide neck flasks, measuring cylinders, etc.

Insert
for the optimum loading of beakers up to 250 ml.

Insert
for the optimum loading of beakers from 250 to 600 ml.

Insert
For the optimum loading of beakers from 600 to 1,000 ml.

Insert
for optimum loading of 210 slides.

Insert
For the optimum loading of up to 18 beakers.

Insert
for optimum loading of 80 test tubes, 16 x 105 mm.

Irrigation sleeves
For the optimum loading of pipettes/MIS instruments in injector units.

Injector nozzle
For the optimum cleaning of the wash items. Size 4 x 160 mm.

Injector nozzle
For the optimum cleaning of the wash items.

Clamps
Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

Clamps
Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

Blind stopper
For the sealing of fittings to load carriers.

Mobile unit
for the optimum loading of up to 96 pipettes.

Lid
For fixing delicate wash items.

Injector nozzle
with plastic supports, Ø 3, length 90 mm.

Injector nozzle
with plastic supports, Ø 3, length 110 mm.

Injector nozzle
with plastic supports, Ø 4, length 140 mm.

Injector nozzle
with plastic supports, Ø 4, length 160 mm.

Injector nozzle
with plastic supports, Ø 4, length 180 mm.

Injector nozzle
with plastic supports, Ø 6, length 200 mm.

Injector nozzle
with plastic supports, Ø 6, length 220 mm.

Injector nozzle
with plastic supports, Ø 6, length 240 mm.

Insert
for the optimum loading of half petri dishes.

Insert
for optimum loading of 56 half petri dishes.

Insert
for optimum loading of 56 half petri dishes.

Stand fitting
for the manual production of demineralised water.

Full demineralisation single use resin
For the regeneration of full demineralisation cartridges

Plastic barrel
For refilling single use resins

Insert
for optimum loading of up to 44 watch glasses.

Insert
for optimum loading of up to 105 watch glasses.

Cover net
For fixing delicate wash items.

Cover net
As cover for wash items in inserts.

Insert
for holding different utensils.

Trolleys
for loading & unloading washer-&disinfectors.

Lid
For fixing delicate wash items.

Dispenser pump
For dispensing liquid media.

Dispenser pump
For dispensing liquid neutral/alkaline media.

Module
for optimum loading of centrifuge tubes, phials and test tubes, for example.

Lid
For optimum securing of delicate items.

Dispenser module for 5-10 litre canisters
With level indicator for the automatic dispensing of liquid cleaning agents.

Dispenser module for 5-10 litre canisters
With level indicator for the automatic dispensing of liquid cleaning agents.

Appliance lid
For the top cover on the machine, 70 cm deep, 90 cm wide.

Lid
For fixing delicate wash items.

Insert
for holding different utensils.

Insert
for the optimum loading of beakers 250 - 600 ml.

Insert
for the optimum loading of beakers up to 250 ml.

Mobile unit
for the optimum loading of wide necked Erlenmeyer flasks.

Dispenser module for 5-10 litre canisters
With level indicator for the automatic dispensing of liquid cleaning agents.

Connection cable
For interruption-free connection to the printer.

Perforated tray inlay
For the gentle cleaning of delicate items by interrupting the spray jet.

Perforated tray inlay
For the gentle cleaning of delicate items by interrupting the spray jet.

Module
for the optimum loading of up to 104 pipettes.

Trolleys
for loading & unloading washer-&disinfectors.

Lower basket
for the optimum loading of centrifuge tubes, phials and test tubes.

Lower basket
for the optimum loading of different inserts and mesh trays.

Surface filter
For optimum protection against contamination from labels or glass splinters.

Insert
for the gentle holding of 5 microtiter plates.

Insert
For the gentle cleaning of delicate items by interrupting the spray jet.

Insert
For the gentle cleaning of delicate items by interrupting the spray jet.
Report printer
for process documentation, integrated

Insert
For the optimum loading of test tubes up to 12 x 75 mm.

Insert
For the optimum loading of test tubes up to 12 x 105 mm.

Insert
For the optimum loading of test tubes up to 12 x 165 mm.

Insert
For the optimum loading of test tubes up to 12 x 200 mm.

Aqua-Soft system
Twin-tank water softener for the continuous removal of soft water up to 40 °dH

Upper basket
for the optimum loading of different inserts.

Upper basket
for the optimum loading of different inserts.

Magnetic spray arm
for spray arm monitoring, suitable for O 167, O 173, O 188, O 190.

Transfer trolley
for loading & unloading washer-&disinfectors.

Module
for the optimum loading of up to 116 pipettes.

Module
for cleaning 88 centrifuge tubes, phials or test tubes, for example.

Bellows dispenser pump
For dispensing liquid acid media.

Bellows dispenser pump
For dispensing liquid neutral/alkaline media.

Scanner
For the simple recording of bar codes for loading and user recognition.

Connection cable type 2
for connection of a machine with serial interface to a PC.

Connection cable type 1
for connection of a machine with serial interface to a PC.

Extension cable
3 m, for the extension of connection cable type 1 and 2.

Extension cable
5 m, for the extension of connection cable type 1 and 2.

Extension cable
10 m, for the extension of connection cable type 1 and 2.

Network cable
for connection to the network, length 3 m (type 6).

Network cable
for connection to the network, length 5 m (type 7).

Crossover network cable
for direct connection to PC, length 3 m (type 8).

Crossover network cable
for direct connection to PC, length 5 m (type 9).

Ink cartridge
for PRT 100 report printer.

Paper roll
for protocol printer APH 500 PRT100 and APH 510 PRT110.

Mobile unit
for the optimum cleaning of instruments on 6 levels.

Wall bracket
for Segosoft modules.

Adapter
For connecting the Miele printer cable to the appliance.

Segosoft network converter
for connection of machines with serial interface for a network.

Full demineralisation cartridge
For optimum water preparation.

Full demineralisation cartridge
For optimum water preparation.

Demineralisation cartridge, empty
For the manual filling of single use resins.

Quick connection
For the simple and convenient changing of demineralisation cartridges.

Upper basket
For the optimum loading of injector modules or inserts.

Upper basket
Height adjustable, for the optimum loading of inserts.

Upper basket
Height adjustable, for the optimum loading of inserts.

Upper basket
For the optimum loading of inserts.

Lower basket
For the optimum loading of injector modules or inserts.

Lower basket
For holding standard DIN mesh trays as well as various inserts.

Mobile unit
for the optimum loading of 38 pipettes.

Module
for the optimum loading of up to 98 pipettes.

Module
For the optimum loading of up to 98 vials.

Jets
for the optimum cleaning of the dispenser compartment.

Segosoft Miele Edition (additional licences)
For connection with a second or additional appliance.

Conversion kit for two cartridges
For the quick change to a full/partial demineralisation cartridge.

Aqua purificator
For two full or partial demineralisation cartridges.

Dispensing cabinet
For process chemicals and dispenser modules

Box plinth
to raise the machine, 60 cm deep, 60 cm wide.

Box plinth
to raise the machine incl. side unit, 60 cm deep, 90 cm wide.

Appliance lid
Cover for top of machine incl. side unit, 60 cm deep, 90 cm wide.

Conversion kit
For use with selected series G 78 load carriers in PG 85 machines.

Conversion kit
for use with selected series G 78 mobile units in PG 85 machines.

Conversion kit
For use with selected series G 78 upper baskets in PG 85 machines.

Transfer trolley
height adjustable, for loading & unloading washer-&disinfectors.

Box plinth
to raise the machine, 70 cm deep, 90 cm wide.

Appliance lid
for the top cover on the machine, 70 cm deep, 90 cm wide.

Communication module
with serial interface (RS232) for connection to a printer.

ConductivityMeter
For measuring the conductivity level and the display for changing the cartridge.

Steam condenser
For effective moisture removal from and cooling of exhaust air.

Built-in report printer
For printing process reports.

Drain pump
For converting machines with drain valves to drain pumps.

Plinth
Incl. drip tray and openings for connecting services.

Mobile unit
with 1 level for cleaning laboratory glassware and utensils.

Mobile unit
with 4 levels for cleaning laboratory glassware and utensils.

Mobile unit
no levels, for cleaning laboratory glassware/utensils.

Insert
for the addition of another level in mobile unit A 501.

Attachment
for the expansion of the A 500 mobile unit to 2 levels.

Module
for the use of e.g. lab glassware inserts on the top level of A 503 mobile units

Mobile unit
with 3 levels for cleaning laboratory glassware and utensils.

Module
for optimum reprocessing of vials and test tubes, etc.

Module
for the optimum reprocessing of large-volume laboratory glassware.

Module
for the optimum reprocessing of volumetric and measuring pipettes.

Module
for the optimum reprocessing of laboratory glassware, 10 injector positions.

Module
for the optimum reprocessing of laboratory glassware, 20 injector positions.

Module
For the optimum reprocessing of laboratory glassware, 36 injector positions.

Mobile unit
with 4 levels for cleaning laboratory glassware and utensils.

Module
for the optimum loading of measuring cylinders.

Injector nozzle
with support, for cleaning laboratory flasks and round flasks.

Injector nozzle
with support, for cleaning Erlenmeyer flasks.

Injector nozzle
with support, for cleaning measuring cylinders.

Module
for the optimum loading of large-volume laboratory glassware.

Colour transfer belt
for protocol printer APH 510 PRT110.

Key set
For adjusting basket heights and installing/removing injector nozzles.

Module
For reprocessing viscometers.

Module
For reprocessing large-volume laboratory glassware.

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item.

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

Module
for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

Module
for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

Module
for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

Holder rack
for injector modules A 300/2 and A 300/3

Holder rack
for injector modules A 301/4 and A 301/5

Holder rack
for injector modules A 302/2 and A 302/3

Mobile unit
for optimum loading of laboratory glassware on upper levels.

Mobile unit
for optimum loading of laboratory glassware on the lowest level.

Mobile unit
for optimum loading of large-volume laboratory glassware, 5 and 10 l.

Mobile unit
for optimum loading of large-volume laboratory glassware, up to 20 l.

Mobile unit
for optimum loading of large-volume laboratory glassware, up to 50 l.

Mobile unit
for optimum loading of up to 56 pipettes.

Mobile unit
for optimum loading of up to 121 pipettes.

Mobile unit
for optimum loading of 2 pipette cartridges.

Mobile unit
for optimum loading of 3 pipette cartridges.

Mobile unit
For optimum loading of 2 pipette cartridges.

Upper basket
with 156 unoccupied injector slots for nozzles with Ø 2.5 mm.

Upper basket
with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

Upper basket
with 84 unoccupied injector slots for nozzles with Ø 2.5 mm.

Upper basket
with 42 unoccupied injector slots.

Upper basket
equipped with 42 APLW 051 injector nozzles

Upper basket
equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles

Upper basket
with 20 unoccupied injector slots.

Upper basket
equipped with APLW 055 injector nozzles

Upper basket
with 16 unoccupied injector slots.

Upper basket
with 27 unoccupied injector slots.

Upper basket
with 121 unoccupied injector slots.

Upper basket
with 121 + 24 unoccupied injector slots.

Upper basket
equipped with 121 APLW 048 injector nozzles and 24 APLW 051 injector nozzles.

Upper basket
with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

Upper basket
equipped with 121 APLW 047 injector nozzles.

Lower basket
with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

Lower basket
equipped with 121 APLW 047 injector nozzles.

Lower basket
with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

Lower basket
with 70 unoccupied injector slots for nozzles with Ø 2.5 mm.

Lower basket
with 56 unoccupied injector slots for nozzles with Ø 2.5 mm.

Lower basket
with 42 unoccupied injector slots for nozzles.

Lower basket
equipped with 42 APLW 052 injector nozzles.

Lower basket
equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles.

Lower basket
equipped with 30 APLW 066 injector nozzles and 12 APLW 067 injector nozzles.

Lower basket
with 24 unoccupied injector slots for nozzles.

Lower basket
equipped with 12 APLW 056 injector nozzles and 12 APLW 052 injector nozzles.

Lower basket
with 20 unoccupied injector slots for nozzles.

Lower basket
equipped with 20 APLW 056 injector nozzles.

Lower basket
with 16 unoccupied injector slots for nozzles.

Lower basket
with 27 unoccupied injector slots for nozzles.

Lower basket
with 27 unoccupied injector slots for nozzles.

Lower basket
with 12 unoccupied injector slots for nozzles.

Lower basket
equipped with 6 APLW 067 injector nozzles and 6 APLW 066 injector nozzles.

Lower basket
with 9 unoccupied injector slots for nozzles.

Lower basket
with 121 + 24 unoccupied injector slots for nozzles.

Lower basket
equipped with 121 APLW 048 injector nozzles and 24 APLW 056 injector nozzles.

Top frame
to create an even surface.

Lid
Height 250 mm, for securing delicate wash items.

Lid
Height 175 mm, for securing delicate wash items.

Lid
Height 45 mm, for securing delicate wash items.

Insert
for the optimum loading of wide-necked Erlenmeyer flasks & measuring cylinders.

Insert
for optimum loading of half petri dishes.

Insert
for optimum loading of test tubes, height 100 mm.

Insert
for optimum loading of test tubes, height 130 mm.

Insert
for optimum loading of test tubes, height 200 mm.

Lid
for APLW 040–042 inserts

Separation net
for dividing the footprint in the APLW 042.

Injector nozzle
with plastic support, conical, Ø 2.5, length 80 mm.

Injector nozzle
with plastic support, conical, and spring holder, Ø 2.5, length 80 mm.

Injector nozzle
with plastic support, conical, Ø 2.5, length 50 mm.

Injector nozzle
with plastic support, star-shaped, Ø 2.5, length 80 mm.

Injector nozzle
with plastic support, star-shaped, Ø 2.5, length 155 mm.

Injector nozzle
with plastic support, star-shaped, Ø 4, length 75 mm.

Injector nozzle
with plastic support, star-shaped with clamp, Ø 4, length 110 mm.

Injector nozzle
with plastic support, star-shaped with clamp, Ø 4, length 175 mm.

Injector nozzle
with plastic support, star-shaped, Ø 6, length 115 mm.

Injector nozzle
with plastic support, star-shaped with clamp, Ø 6, length 135 mm.

Injector nozzle
with plastic support, star-shaped with clamp, Ø 6, length 175 mm.

Injector nozzle
with plastic support, star-shaped with clamp, Ø 6, length 225 mm.

Injector nozzle
with plastic support, star-shaped with clamp, Ø 6, length 275 mm.

Injector nozzle
with plastic support for securing load items, Ø 6, length 135 mm.

Injector nozzle
with plastic support for securing load items with clamp, Ø 6, length 225 mm.

Injector nozzle
with plastic support for securing load items with clamp, Ø 6, length 275 mm.

Injector nozzle
with plastic support and bottle neck holder, star-shaped, Ø 6, length 115 mm.

Injector nozzle
with plastic support and bottle neck holder, star-shaped, Ø 6, length 135 mm.

Injector nozzle
with plastic support and bottle neck holder, star-shaped, Ø 6, length 175 mm.

Injector nozzle
with plastic support and bottle neck holder, star-shaped, Ø 6, length 225 mm.

Injector nozzle
with plastic support and bottle neck holder, star-shaped, Ø 6, length 275 mm.

Injector nozzle
with holder, Ø 6, length 175 mm.

Injector nozzle
with holder, Ø 6, length 225 mm.

Injector nozzle
with holder, Ø 6, length 275 mm.

Injector nozzle
with stainless steel support, Ø 8, length 255 mm.

Injector nozzle
with stainless steel support, Ø 8, length 320 mm.

Injector nozzle
w. holder for meas. cylinders up to Ø 105 mm & injector nozzles Ø 8, l. 320 mm.

Blind stopper
For sealing injector positions on load carriers.

Bottle neck holder
Ø 33 mm, for injector nozzles Ø 6 mm.

Bottle neck holder
Ø 45 mm, for injector nozzles Ø 6 mm.

Bracket
for measuring cylinders up to Ø 105 mm and injector nozzles Ø 8 mm.

Holder
for pipettes with maximum 14 mm and minimum 4 mm diameter.

Holder
for injector nozzles Ø 2.5 mm.

Blind stopper
for sealing unused openings on load carriers.

Irrigation sleeves
with cap for pipettes, maximum Ø 11 mm

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 210 mm, 20 items

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 130 mm, 10 items.

Injector nozzle
with plastic supports, nozzle diameter 6 mm, length 130 mm, 20 items.

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

Injector nozzle
with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items.

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

Injector nozzle
with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items.

Module
for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

Module
for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

Module
for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

Lid
for securing delicate load items.

Insert
for loading different utensils.

Transfer trolley
For loading and unloading washer-disinfectors and lab washers.

Conversion kit
For using lab carts with the G 7827/28 and PG 8527/28 machines in the PG 86xx.

Holder rack
For injector module A 620.

Holder rack
For injector module A 621.

Holder rack
For injector module A 622.

Surface filter
For optimum protection against contamination from labels or glass splinters.

Insert
For the gentle cleaning of delicate load items by interrupting the water jet.

Insert
For the gentle cleaning of delicate load items by interrupting the water jet.

Insert
For the gentle cleaning of delicate load items by interrupting the water jet.

Insert
for loading different utensils.

Drying unit, with ventilation slots, electric
For appliances 900 mm wide and optimum internal and external drying of loads.

Drying unit, with ventilation slots, electric
For appliances 1150 mm wide and optimum internal and external drying of loads.

Built-in report printer
For printing process protocols.

Dispenser module for 5-10 litre canisters
with level indicator for the automatic dispensing of liquid media.

Dispenser module for 5 litre canister
with level indicator for the automatic dispensing of liquid media.

Transport trolley, automatic
for loading & unloading large-scale dishwashers with electric height adjustment.

Mobile unit
no levels, for cleaning laboratory glassware/utensils.

Basket
for optimum loading of injector modules or inserts.

Basket
height adjustable, for optimum loading of inserts.

Basket
for various inserts.

Basket
for optimum loading of injector modules or inserts.

Charging station
for APLW 869 battery.

Battery
for use in ATT 86.
Learn more about our accessories for laboratory washers
