Miele-Logo
 only products
da429-4
DA 429-4Enlarge Image


Reserve a place at a Live Cooking Demonstration.


          
            Order Brochure

 
DA 429-4

Installation

Wall mounted cooker hood for extraction mode
Recirculation mode possible with optional conversion kit and active charcoal filters

Dimensions

90 cm wide
Matt brushed stainless steel cooker hood body and tower
Wall-mounted cooker for installation against a wall or in between units

Controls

Touch controls with LED indicators for ON/OFF, hob illumination and fan settings
Operating hours counter for grease and charcoal filters (individually programmable), Run-on time (5/15 min)
The Intensive setting can be programmed to switch off automatically after 10 minutes
Three fan settings plus Intensive
Preparation for Con@ctivity

Features

CleanCover for simple cleaning of the inside of the hood
Electronic suction power regulation
Three removable, dishwasher-safe stainless steel grease filters
Non-return flap
Ducting diameter 150/125 mm
Recommended ducting diameter: 150 mm
Ducting outlet through top of cooker hood or through the wall
Halogen lighting, 2 x 20 Watt, dimmable
Double-sided radial fan
Sound insulation inside cooker hood
Telescopic wall-mounting bracket

Safety

Safety switch-off

Extraction rate

Extraction 150 mm Ø nach EN 61591
Int. 640 m³/h, 65 dB(A) re 1 pW (52 dB(A) re 20 µPa Sound pressure)
Max. 400 m³/h, 53 dB(A) re 1 pW (40 dB(A) re 20 µPa Sound pressure)
Extraction 125 mm Ø nach EN 61591
Int. 580 m³/h, 66 dB(A) re 1 pW (53 dB(A) re 20 µPa Sound pressure)
Max. 380 m³/h, 54 dB(A) re 1 pW (41 dB(A) re 20 µPa Sound pressure)
Recirculation 150 mm Ø nach EN 61591
Int. 490 m³/h, 72 dB(A) re 1 pW (59 dB(A) re 20 µPa Sound pressure)
Max. 330 m³/h, 65 dB(A) re 1 pW (52 dB(A) re 20 µPa Sound pressure)

Standard accessories

Reducing stub for 125 mm Ø

Optional accessories

Active charcoal filter DKF 12-1
Recirculation mode conversion kit DUW 20
Silencer DASD 150
Wall pipe DMK 150
Flexible ducting DAS 100-150
Communication module XKM 2000 DA for Con@ctivity

Important

Also available as a production special

Product information may be subject to change.

Installation drawings

1) Extraction
2) Recirculation
3) Ventilation grille position at the top for recirculation
4) and 5) Vent cut-out positions (area 5 not required for recirculation)