For installation in an internal location, e.g. in a loft

Stainless steel casing, double sided radial fan,ducting connection

125/150 mm diameter

Extraction = 280-900 m3/h. Unrestricted

Control cable, 500 cm long, with plug connectors

Additional control cables

Planning tips:

When planning the position of the cooker hood make sure that there is at

least 5-7 meters between the cooker hood and the external motor.

For installing on an external wall

Stainless steel casing, single sided radial fan, 75 cm long control cable with plug connectors to link the cooker hood with an external motor. Ducting connection 125/150 mm diameter

Extraction = 440 - 1000 m3/h. Unrestricted

Telescopic wall pipe, 180 mm diameter (extends up to 45 cm), additional

mains cable, 500 cm long, with plug connectors, stainless steel casing

Additional mains cable

Planning tips

When planning the position of the cooker hood make sure that there is at

least 5-7 meters between the cooker hood and the external motor.

Aluminium vent hose, 1.25 m length, extensible for 5 m

For installation on a tiled roof with an angle of at least 10°

Not suitable for use on flat roofs

Stainless steel casing with skirt

Single sided radial fan

Control cable with plug connectors for linking the external motor to the cooker hood

Ducting diameter 125/150 mm

Extraction = 440-1000 m3/h. Unrestricted (820 m3/h in practice),

[measurements taken under installation conditions as follows: Cooker hood, one 90° angle, 4 m ducting between cooker hood and external motor]

Additional control cable, 500 cm long, with plug connectors

Additional control cables

Planning tips:

Can withstand temperatures of up to -20°C

For converting an island hood from extraction to recirculation mode Supplied with directional unit, ducting diameter 150 mm

Conversion kit for DA 420 and DA 424 V. Vented to recirculation duct

diameter 100 mm.

Must be supplied with relevant active charcoal filter.

Standard accessories:

Directional unit diameter 150 mm

Geruchsfilter für den Umluftbetrieb

Active charcoal filters for use on Miele hoods DA 249-4 and DA 44x-4 in recirculation mode.

In addition to the stainless steel grease filters, active charcoal filters are used for hoods in recirculation mode. Unpleasant cooking odours can be neutralized by the active charcoal filters with their special micropores.

By using your Miele hood in recirculation mode, please be aware that the operating hours counter is activated. When the grease or charcoal filters have reached maximum congestion, the operating hours counter indicates about the status of the filter. Your Miele hood in recirculation mode can only work perfectly if you change the filters regularly. Usually they have to be changed every 3 or 4 weeks.

You can find all details about the ideal care and cleaning of your Miele hood in the instruction manual.

Attention: A grease lubricated filter comprehends the danger of fire!

1 Active charcoal filter for use on all Miele hoods in a recirculation mode. Not suitable for DA 146, DA 15x, DA 186, DA 249-4, DA 2xxx and DA 3xxx.

This active charcoal filter is available in a pack of two(DKF 16-1) or in a pack of 4 filters (DKF 17-1).

In addition to the stainless steel grease filters, active charcoal filters are used for hoods in recirculation mode.

Unpleasant cooking odours can be neutralized by the active charcoal filters with their special micropores. By using your Miele hood in recirculation mode, please be aware that the operating hours counter is activated.

When the grease or charcoal filters have reached maximum congestion, the operating hours counter indicates about the status of the filter. Your Miele hood in recirculation mode can only work perfectly if you change the filters regularly. Usually they have to be changed every 3 or 4 weeks.

You can find all details about the ideal care and cleaning of your Miele hood in the instruction manual.

Attention: A grease lubricated filter comprehends the danger of fire!

Active charcoal filter for use on Miele hood DA 3xxx in recirculation mode.

In addition to stainless steel grease filters, active charcoal filters are used for hoods in recirculation mode.

Unpleasant cooking odours can be neutralized by the active charcoal filters with their special micropores. By using your Miele hood in recirculation mode, please be aware that the operating hours counter is activated. When the grease or charcoal filters have reached maximum congestion, the operating hours counter indicates about the status of the filter.

Your Miele hood in recirculation mode can only work perfectly if you change the filters regularly. Usually they have to be changed every 3 or 4 weeks.

You can find all the details about the ideal care and cleaning of your Miele hood in the instruction manual.

Attention: A grease lubricated filter comprehends the danger of fire!

2 Active charcoal filters for use on Miele hood DA 186 in recirculation mode.

In addition to the stainless steel grease filters, active charcoal filters are used for hoods in recirculation mode. Unpleasant cooking odours can be neutralized by the active charcoal filters with their special micropores. By using your Miele hood in recirculation mode, please be aware that the operating hours counter is activated. When the grease or charcoal filters have reached maximum congestion, the operating hours counter indicates about the status of the filter.

Your Miele hood in recirculation mode can only work perfectly if you change the filters regularly. Usually they have to be changed every 3 or 4 weeks.

You can find all details about the ideal care and cleaning of your Miele hood in the instruction manual.

Attention: A grease lubricated filter comprehends the danger of fire!

2 Active charcoal filters for use on Miele hood DA 2xxx in recirculation mode.

In addition to the stainless steel grease filters, active charcoal filters are used for hoods in recirculation mode. Unpleasant cooking odours can be neutralized by the active charcoal filters with their special micropores. By using your Miele hood in recirculation mode, please be aware that the operating hours counter is activated. When the grease or charcoal filters have reached maximum congestion, the operating hours counter indicates about the status of the filter.

Your Miele hood in recirculation mode can only work perfectly if you change the filters regularly. Usually they have to be changed every 3 or 4 weeks. You can find all details about the ideal care and cleaning of your Miele hood in the instruction manual.

Attention: A grease lubricated filter comprehends danger of fire!